You are here: HOME PAGE >> PRODUCTS >> Laser technology >>FlexiCut
Our Sites
.......maximum flexibility in a limited space
DESCRIPTION Laser plotter FlexiCut is the medium-sized laser cutting and laser engraving machine of the Proel Laser range. This model allows for maximum flexibility as it is available in different configurations and may be equipped with three different laser sources (25, 30 and 50 Watt). The limited size and large cutting area (1000x540 mm) of this model allow it to be used for any type of production, from the small embroidery business, or craftsman’s studio, to the large industry.
MAIN FEATURES An easily transportable Laser machine, equipped with a CO2 Laser source of 25, 30, 50 Watt (air-cooled or liquid-cooled), a cutting head driven on two axes by powerful motors, the possibility of assembling either a fixed cutting plane or a motorized cutting plane (for automatic loading/discharge of material to be worked/finished). Usable cutting area (1000x540 mm), external fume suction device that may be connected to a filtering unit, RS-232 interface for connection to a Personal Computer, possibility of control at three power levels (usually one for cutting and two for engraving), possibility of selecting two cutting modes: constant speed or variable speed for optimizing times, cleaning of the cutting head using air produced by an internal pump or with air produced by an external source or with gases specific for laser cutting (usually Nitrogen). Laser pointer for positioning the material to be used. Equipped with many accessories (rolling system, unrolling system, head with adjustable focus, videocamera, etc).
MAIN OPERATING FUNTIONS Memorization of 10 different work profiles Management of 6 languages for interfacing with the user Management of three levels of laser power Setting of the cutting/engraving speed Setting of the cutting head handling mode Possibility of manually positioning the cutting head by means of the control panel Possibility of manually handling the cutting plane advancement by means of the control panel "Spot Laser" function for locating the laser ray on the material to be used "Pause Cut" function Possibility of continuing an unfinished job even after an electrical power failure Self-diagnostic feature Cutting assisted by a videocamera Cutting of compositions (automatic repetition of the same cutting shape) Management of different fume suction modes Possibility of cutting the material in a straight line by means of the control panel Work hours count Work cycles count for each job Display of the position of the cutting head (in X,Y coordinates)
Memorization of 10 different work profiles
