DESCRIPTION
Laser plotter JumboCut is the large laser cutting machine of the Proel range for laser cutting and laser engraving. This machine, available in the 25, 50 or the 100 Watt version, is ideal for those who need to cut large sizes of material (up to 1500x775 mm) or even to cut material supplied in rolls.
MAIN FEATURES
An easily transportable laser machine, equipped with a CO2 Laser source of 25, 50 or 100 Watt (air-cooled or liquid-cooled), a cutting head driven on two axes by powerful motors, the possibility of assembling either a fixed cutting plane or a motorized cutting plane (for automatic loading/discharge of material to be worked/finished). Usable cutting area (1500x775 mm), external fume suction device that may be connected to a filtering unit, RS-232 interface for connection to a Personal Computer, possibility of control at three power levels (usually one for laser cutting and two for laser engraving), possibility of selecting two cutting modes: constant speed or variable speed for optimizing times, cleaning of the cutting head using air produced by an internal pump or with air produced by an external source or with gases specific for laser cutting (usually Nitrogen). Laser pointer for positioning the material to be used. Equipped with many accessories (rolling system, unrolling system, head with adjustable focus, videocamera, etc).
MAIN OPERATING FUNTIONS
Memorization of 10 different work profiles
Management of 6 languages for interfacing with the user
Management of three levels of laser power
Setting of the laser cutting/ laser engraving speed
Setting of the cutting head handling mode
Possibility of manually positioning the cutting head by means of the control panel
Possibility of manually handling the cutting plane advancement by means of the control panel
"Spot Laser" function for locating the laser ray on the material to be used
"Pause Cut" function
Possibility of continuing an unfinished job even after an electrical power failure
Self-diagnostic feature
Cutting assisted by a videocamera
Cutting of compositions (automatic repetition of the same cutting shape)
Management of different fume suction modes
Possibility of cutting the material in a straight line by means of the control panel
Work hours count
Work cycles count for each job
Display of the position of the cutting head (in X,Y coordinates)
I would like to receive more information 
VERSIONS AVAILABLE
The following versions are currently available:
| JUMBOCUT GRID 25 Watt |
fixed cutting plane and manual unrolling unit |
| JUMBOCUT GRID 30 Watt |
| JUMBOCUT GRID 50 Watt |
| JUMBOCUT GRID 100 Watt |
| JUMBOCUT ROLL 25 Watt |
mobile cutting plane and automatic unrolling unit |
| JUMBOCUT ROLL 30 Watt |
| JUMBOCUT ROLL 50 Watt |
| JUMBOCUT ROLL 100 Watt |
| JUMBOCUT ROLL PLUS 25 Watt |
mobile cutting plane and automatic and self-centering unrolling system |
| JUMBOCUT ROLL PLUS 30 Watt |
| JUMBOCUT ROLL PLUS 50 Watt |
| JUMBOCUT ROLL PLUS 100 Watt |
Upon request, we shall also investigate the possibility of supplying customized items.
USABLE SOFTWARE for LASER CUTTING
FOCUSCUT III and VideoCut
TECNICAL SPECIFICIFICATIONS
| Electrical input |
1phase 220/240 Vac ±10% - 50/60Hz ±2% |
| Absorbed power max |
1400 W |
| Dimensions (WxDxH) |
1950x1600x1130 mm |
| Weight max. |
300 Kg |
| Noise emission |
< 70 dB (without fumes suction unit) |
| Drive motors type |
brushless |
| Working area (WxD) |
1500x775 mm (59"x31") |
| Cutting plane size (WxD) |
1630x890 mm (64"x35") |
| Cutting plane type |
metal grid / rear part opened
Motorized metal mesh / rear part opened |
| Fumes extraction |
top and bottom suction system |
| Fumes suction |
external free standing unit |
| Laser source type |
CO2 - 10.6 µm - sealed type - RF Air or liquid cooled |
| Laser power |
25W / 30W / 50W / 100W |
| Laser beam delivery |
mirrors and XY movable cutting head |
| Laser spot diameter |
100 µm |
| Cutting speed |
1.2 m/s |
| Translation speed |
1.2 m/s |
| Acceleration |
1 g |
| Resolution |
8 µm |
| Optics cleaning |
internal or external air /
external gas |
| User interface |
keyboard with display
|
| Languages |
EN / IT / FR / GE/ SP / PO |
| Software |
Focuscut III - Videocut |
| Laser product Class |
class 3R (EN-60825-1:2003-02)
class IIIA (USA-CDRH 21 CFR) |
| Safeties |
protective enclosures + laser beam stop access panel with safety interlocks |
| Material positioning |
red light laser pointer on the cutting head |
The Manufacturer reserves the right to make modifications and improvements without prior warning.
To know more...
Do not hesitate to contact us for explanations, further information or to ask us for a free quote without obligation:
I would like to receive more information
I would like to receive a quote
